|
| Dimension | |
|
| Table | |
|
|
|
|
| LABEL | DESCRIPTION |
|
|
|
|
|
| Bridge ID | This is the unique identifier for this bridge, consisting of bridge priority plus MAC |
|
|
| address. This ID is the same for Root and Our Bridge if the switch is the root |
|
|
| switch. |
|
|
|
|
|
| Hello Time (second) | This is the time interval (in seconds) at which the root switch transmits a |
|
|
| configuration message. The root bridge determines Hello Time, Max Age and |
|
|
| Forwarding Delay. |
|
|
|
|
|
| Max Age (second) | This is the maximum time (in seconds) a switch can wait without receiving a |
|
|
| configuration message before attempting to reconfigure. |
|
|
|
|
|
| Forwarding Delay | This is the time (in seconds) the root switch will wait before changing states (that is, |
|
| (second) | listening to learning to forwarding). |
|
|
|
|
|
| Cost to Bridge | This is the path cost from the root port on this switch to the root switch. |
|
|
|
|
|
| Port ID | This is the priority and number of the port on the switch through which this switch |
|
|
| must communicate with the root of the Spanning Tree. |
|
|
|
|
|
| Topology Changed | This is the number of times the spanning tree has been reconfigured. |
|
| Times |
|
|
|
|
|
|
| Time Since Last | This is the time since the spanning tree was last reconfigured. |
|
| Change |
|
|
|
|
|
|
| Poll Interval(s) | The text box displays how often (in seconds) this screen refreshes. You may change |
|
|
| the refresh interval by typing a new number in the text box and then clicking Set |
|
|
| Interval. |
|
|
|
|
|
| Stop | Click Stop to halt STP statistic polling. |
|
|
|
|
|
19.1.2LACP Status
Click LACP Status in the Statistics screen to open this screen. Use this screen to view port trunking. See the Switch Setup chapter for more information on LACP.
LACP aggregation ID consists of the following information:
Statistics |
