ZyXEL Communications ES-3024 manual Commands Introduction

Dimension ES-3024 Ethernet Switch

		COMMAND	DESCRIPTION
		list	Lists all profiles in the internal
			switch user database.
class			A class is the basic rule
			parameters for a bandwidth
			control, port mirror or port filter
			rule.
	display		Displays run-time bandwidth
			control, port mirror and port filter
			rule status.
	l2set	<src port> <src mac> <src	Sets source/destination port,
		vid><dest port><dest mac> <dest	MAC address and VLAN group
		vid>	information.
	del	<class id>	A class is automatically created
			when you create a bandwidth
			control, port mirror or port filter
			rule. This command deletes the
			specified class.
bmstorm			These commands relate to
			broadcast storm control.
	disable		Clears current run-time settings
	type	<type>	Specifies the type of frames to
			limit in the switch; broadcast,
			multicast or both.
	basis	<type>	Specifies whether frames are
			limited in the switch on a per-
			packet or per-Byte basis.
	display	[index]	Displays broadcast storm control
			ports’ settings
	interval	[value]	Sets/displays the monitor
			interval.
	set	<port><threshold><direction>	Specifies the packet threshold
			and direction (ingress/egress) on
			the specified port.
	del	<index>	Disables broadcast storm control
			on this port.
mac	static		Displays static MAC addresses.
		disable	Clears current run-time static
			MAC address settings
		display [port]	Displays current run-time static
			MAC addresses on the specified
			port.
		set<port><mac addr.><vid>	Configures a static MAC address
			on the specified port.

21-12 Commands Introduction