ZyXEL Communications ES-3024 manual Gvrp

Dimension ES-3024 Ethernet Switch

Table 6-2 Port Edit Screen

LABEL	DESCRIPTION	EXAMPLE
Spanning Tree	Select Spanning Tree Protocol to enable. See section 5.5 for more
Protocol	information.
Priority	Configure the priority for each port here. Priority decides which port	128 (default)
	should be disabled when more than one port forms a loop in a switch.
	Ports with a higher priority numeric value are disabled first. The
	allowed range is between 0 and 255 and default value is 128.
Path Cost	Path cost is the cost of transmitting a frame on to a LAN through that	100
	port. It is assigned according to the speed of the bridge. The slower the
	media, the higher the cost - see Table 5-2 STP Path Costs for more
	information.

802.1Q VLAN: These fields are only visible if you chose 802.1Q In the VLAN Type field in the Switch Setup screen.

Default VLAN ID	Default VLAN ID is the PVID, the Port VLAN ID assigned to untagged	1(default)
	frames or priority-tagged frames received on this port.
GVRP	GVRP (GARP VLAN Registration Protocol) is a registration protocol
	that defines a way for switches to register necessary VLAN members
	on ports across the network. Select this check box to enable GVRP
	and propagate VLANs information beyond the local switch.
VLAN Acceptable	Choose All if you want the port to accept both tagged and untagged	All
Frame Type	incoming packets (to that port). Choose Tagged if you want the port to
	accept just tagged incoming packets (to that port). See section 5.4 for
	more information on VLANs.
Port Security	Port security means that only packets with dynamically learned MAC
	addresses and/or configured static MAC addresses can pass through
	this port. The switch can learn up to 16K MAC addresses in total with
	no limit on individual ports other than the sum cannot exceed 16K.
	For maximum port security, enable Port Security, disable Mac
	address learning and configure static MAC address(es) for that port. It
	is not recommended you disable Port Security together with MAC
	address learning as this will result in many broadcasts.
Address Learning	MAC address learning reduces outgoing broadcast traffic. For MAC
	address learning to occur on a port, the port must port must have
	address learning active and the port itself must be active.
Active	Select Active to enable MAC address learning on this port.

Port Setup 6-5