
Dimension
Table 21-1 command summary
COMMAND | DESCRIPTION |
|
| setCommunity [<community>] | Sets or displays the SNMP |
|
|
| SetRequest community. |
|
|
|
|
|
| trustedHost [<hostt>] | Sets or displays the SNMP trusted |
|
|
| host. |
|
| trapCommunity [<community>] | Sets or displays the SNMP Trap |
|
|
| community. |
|
| trapDest [<destination>] | Sets or displays the SNMP trap |
|
|
| server. |
|
| disp | Shows SNMP settings. |
| server | access <telnetftpwebicmp> | Enables or disables a service. |
|
| <enable/disable> |
|
|
| port <telnetftpweb> <portNo> | Sets a port for a service. |
|
| secIP setEntry <index> <start- | Sets a secured entry. |
|
| addr> |
|
|
| [FTP] [WEB] [ICMP]] |
|
|
| secIP active <index> | Turns on a secured entry. |
|
| secIP inactive <index> | Turns off a secured entry. |
|
| sec IP disp | Shows the secured entries. |
|
| disp | Shows the device’s service port |
|
|
| numbers and access control |
|
|
| settings. |
exit |
|
| Ends the console or telnet |
|
|
| session. |
ip |
|
|
|
| address | [addr] | Displays the host IP address. |
| alias | <iface> | Sets an alias for the specified |
|
|
| interface. |
| aliasdis | <01> | Disables/enables the alias for the |
|
|
| specified interface. |
| arp | status <iface> | Displays an interface’s IP Address |
|
|
| Resolution Protocol status. |
| httpd | debug [onoff] | Enables or disables the HTTP |
|
|
| debug flag. |
| icmp |
|
|
|
| status | Displays the ICMP statistics |
|
|
| counter. |
|
| discovery <iface> [onoff] | Sets the ICMP router discovery |
|
|
| flag. |
| ifconfig | [iface] [ipaddr] [broadcast | Configures a network interface. |
|
| <addr> mtu <value>dynamic] |
|
Commands Introduction |