ZyXEL Communications ES-3024 manual VLAN1Q Status Command Example

Dimension ES-3024 Ethernet Switch

ras> sys sw vlan1q vlan status

This command displays the current configuration of the IEEE 802.1Q VLAN.

See the following example shows the default VLAN settings. The default VLAN allows all ports to connect to each other and sets them to send untagged packets.

ras> sys sw vlan1q status

802.1Q VLAN Setup : GVRP = Enable Managament VLAN ID = 1

Figure 23-16 VLAN1Q Status Command Example

23-10 IEEE 802.1Q Tagged VLAN