SATO 412E, 408e manual Service Mode CONT’D, Select Language English, Priority Setting Command LCD

Section 3: Configuration and Operation

3.6 SERVICE MODE (CONT’D)

3.6.6 Forward/Backfeed Amount

This setting allows customization of the label feed/backfeed distance instead of the default setting.

If DISTANCE is selected, the next menu appears, for setting of the amount of label feed/backfeed. Use the LINE button to select DISTANCE or DEFAULT, and if applicable, to set the amount of label feed/backfeed.

Press the FEED button for the next screen.

FORWARD/BACKFEED DISTANCE DEFAULT

FORWARD/BACKFEED DISTANCE 001MM

3.6.7 Euro Code
This setting defines the code to represent the Euro mark. The	EURO CODE
default is D5H.

D5

Use the FEED button to move the cursor to the set the value of the

code. Use the LINE button to set the value under the cursor. When the value has been set, the following screen appears.

3.6.8 Select Language

This screen lets you choose the language used for all commands and messages on the LCD. Use the LINE button from ENGLISH (default), FRENCH, GERMAN, SPANISH, ITALIAN, PORTUGUESE and two repeated options for ENGLISH. Press the FEED button to confirm the setting and proceed to the next screen.

SELECT LANGUAGE ENGLISH

3.6.9 Command or LCD Priority

Use this setting to determine whether SBPL commands are accepted and allowed priority over settings of Print Darkness, Print Speed, Print Offset via LCD. The default setting is COMMAND, where SBPL commands take precedence over settings made via the LCD menus.

PRIORITY SETTING COMMAND LCD

Press the LINE button to select Command or LCD. Press the FEED button for the next screen.

3.6.10 Ignore CAN/DLE

Determines whether the CANCEL and DATA LINK ESCAPE codes are processed or ignored. Select YES to ignore, and NO to process the codes. The default is NO.

IGNORE CAN/DLE

YES NO

Press the LINE button to select YES or NO, then press the FEED button for the next screen.

LM Basic 408e/412e Operator’s Manual Page 3-13