ZyXEL Communications ES-3024 manual Configuring or Editing a Static MAC Forward Rule, Vid

Dimension ES-3024 Ethernet Switch

	Table 9-1 Static MAC Forward Setup
FIELD	DESCRIPTION
Port	This field displays the port where the MAC address shown in the next field will be forwarded.
MAC Address	This field displays the MAC address that will be forwarded.
Active	This field displays whether this static MAC address forwarding rule is active or not. You may
	temporarily deactivate a rule without deleting it.
Add	To add a new static MAC address-forwarding rule, click this button.
Delete	To delete a rule, select its checkbox in the Delete column and then click this Delete button.
Cancel	Click Cancel to begin configuring this screen afresh.

9.2 Configuring or Editing a Static MAC Forward Rule

Click Add to configure a new rule or click an index number to edit an existing static MAC address rule. Either way, a screen as shown next is displayed.

	Figure 9-2 Configuring or Editing a Static MAC Forward Rule
	Table 9-2 Configuring or Editing a Static MAC Forward Rule
FIELD	DESCRIPTION
Active	Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
	without deleting it by deselecting this check box.
Name	Type descriptive name for identification purposes for this static MAC address forwarding rule.
MAC Address	Type the MAC address in valid MAC address format, that is, six hexadecimal character pairs.
	Static MAC addresses do not age out.
VID	Type the VLAN identification number.
Port	Select a port where the MAC address entered in the previous field will be automatically forwarded.

Click Apply to save your changes back to the switch or click Cancel to begin configuring this screen afresh.

9-2 Static MAC Forward Edit Setup