ZyXEL Communications ES-3024 manual Traceroute Host ttl wait queries

Dimension ES-3024 Ethernet Switch

Table 21-1 command summary

			COMMAND	DESCRIPTION
		traceroute	<host> [ttl] [wait] [queries]	Sends ICMP packets to trace the
				route of a remote host.
		igmpsnoop
			status	Displays the IGMP group table.
			querier	Displays the port number of the
				incoming port that received the
				latest IGMP querier.
			enable	Turns on IGMP snooping.
			disable	Turns off IGMP snooping.
config		save		This command stores tagged IEEE
				802.1Q VLAN and STP
				configurations only in nonvolatile
				memory. All other command
				configurations are lost when you
				restart the switch.
The following commands are system switch commands; all are preceded with sys sw .
			COMMAND	DESCRIPTION
	garp	status		Shows the GARP timer status.
		timer	<join timer(ms)><leave	Sets the GARP timer’s Join
			timer(ms)><leave all timer<ms>	Timer, Leave Timer and Leave
				All Timer.
	gvrp	status		Shows whether GVRP is
				enabled or not.
		enable		Enables GVRP.
		disable		Disables GVRP.
	qos	defpri	<port> [<0..7>]	Sets the default ingress User
				Priority for a port.
		map	<0..7> [<queue>]	Maps a User Priority to a Traffic
				Class.
	vlan1q			All “sys sw vlan1q” commands
				relate to IEEE 802.1Q Tagged
				VLAN configuration. Use “config
				save” to save your configuration
				changes.
		port	status <port>	Shows a port’s VLAN
				information.
			defaultvid <port><vid>	Sets the default VLAN ID of a
				port.
			accept <port> <alltagged>	Sets the type of frames that a
				port accepts.

21-8 Commands Introduction