Dimension
19.1.5Port Statistics
Click Port Statistics in the Statistics screen to open this screen. Use this screen to check status and performance data about the switch’s ports.
| Figure |
| Table |
|
|
LABEL | DESCRIPTION |
|
|
System up Time | This field shows how long the system has been running since the last time it was started. |
|
|
Port | This identifies the Ethernet port. |
|
|
Link | This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or another value |
| depending on the uplink module being used) and the duplex (F for full duplex or H for half). |
|
|
State | This field displays the STP state of the port. See the Switch Setup chapter for details on |
| STP states. |
|
|
LACP | This fields displays whether LACP has been enabled on the port. |
|
|
TxPkts | This field shows the number of transmitted frames on this port. |
|
|
RxPkts | This field shows the number of received frames on this port. |
|
|
Errors | This field shows the number of received errors on this port. |
|
|
Statistics |
