Dimension ES-3024 Ethernet Switch

 

 

Table 21-1 command summary

 

 

 

 

 

 

 

 

 

 

COMMAND

 

DESCRIPTION

 

 

 

 

 

 

 

 

 

switch

[onoff]

Enables/disables/ the system trace

 

 

 

 

 

log or shows whether it’s on or off.

 

 

 

online

[onoff]

Enables/disables the trace log

 

 

 

 

 

onscreen display (for example in

 

 

 

 

 

the telnet management window).

 

 

 

 

 

 

 

 

 

level

[level]

Sets the level (1-10) of trace logs

 

 

 

 

 

(1 shows the least) to display.

 

 

 

type <bitmap>

Uses hexadecimal characters to

 

 

 

 

 

set the type of trace logs to record.

 

 

 

disp

 

Shows the trace log.

 

 

 

clear

 

Erases the trace log.

 

 

 

call

 

Shows call events.

 

 

 

encapmask

[mask]

Shows which type of

 

 

 

 

 

encapsulation the trace log

 

 

 

 

 

records or sets it if you specify the

 

 

 

 

 

encapsulation’s hexadecimal

 

 

 

 

 

character.

 

 

 

 

 

 

 

 

trcpacket

 

 

 

 

 

 

create <entry> <size>

Creates a packet trace buffer.

 

 

 

destroy

 

Removes the packet trace buffer.

 

 

 

channel <name>

Sets the packet trace direction for

 

 

 

[noneincomingoutgoingbothway

a given channel.

 

 

 

]

 

 

 

 

 

string [onoff]

Enables/disables the sending of a

 

 

 

 

 

log to the trace packet buffer when

 

 

 

 

 

configuration changes are made or

 

 

 

 

 

displays the current setting.

 

 

 

 

 

 

 

 

switch [onoff]

Enables/disables packet trace or

 

 

 

 

 

displays the current setting.

 

 

 

disp

 

Displays the trace packets.

 

 

 

udp

 

Sends the trace packets to

 

 

 

 

 

another system using UDP.

 

 

 

udp switch [onoff]

Enables/disables the sending of

 

 

 

 

 

the trace packets to another

 

 

 

 

 

system using UDP or displays the

 

 

 

 

 

current setting.

 

 

 

 

 

 

 

 

udp addr <addr>

Sets the target IP address for

 

 

 

 

 

sending trace packets using UDP.

 

 

 

udp port <port>

Sets the UDP port (should match

 

 

 

 

 

that of the target IP address) for

 

 

 

 

 

sending trace packets using UDP.

 

 

 

 

 

 

 

 

parse [[start_idx], end_idx]

Displays detailed packet details of

 

 

 

 

 

the packet range specified.

 

 

 

 

 

 

 

Commands Introduction

21-3

Page 131
Image 131
ZyXEL Communications ES-3024 manual Switch Onoff