ZyXEL Communications ES-3024 manual Trunk Setup

Dimension ES-3024 Ethernet Switch

	Figure 13-1 Trunk Setup
	Table 13-2 Trunk Setup
LABEL	DESCRIPTION
Trunk ID	The trunk ID identifies the trunk group, that is, one logical link containing multiple ports
	– see Table 13-1 Trunk Groups.
Starting Port	This is the beginning port in the trunk group’s port range and is not configurable - see
	Table 13-1 Trunk Groups.
Ending Port	Select the end port in the port range from the drop-down list box - see Table 13-1 Trunk
	Groups.
Active	Make sure to select this check box to activate the trunk group. You may temporarily
	deactivate a trunk group without deleting it by clearing this check box.

Click Apply to save your changes back to the switch or click Cancel to begin configuring this screen afresh.

13-2 Trunk Setup