ZyXEL Communications ES-3024 manual Configuring or Editing a Mirror Rule

Dimension ES-3024 Ethernet Switch

		Figure 11-2 Configuring or Editing a Mirror Rule
		Table 11-2 Configuring or Editing a Mirror Rule
LABEL		DESCRIPTION
Active		Make sure to select this check box to activate your rule. You may temporarily
		deactivate a rule without deleting it by clearing this check box.
Name		Type a descriptive name for this mirror rule. This is for identification purposes only.
Direction		Choose the direction to which the rule applies from Incoming, Outgoing or Both.
Source		The source and destination fields identify the traffic you want to copy for analysis. You
		can identify source-destination traffic through a combination of MAC address, VLAN
		group and port. Configure these parameters in the next three fields.
MAC Address		Type a MAC address in valid MAC address format, that is, six hexadecimal character
		pairs or click All Entries to apply the filter rule to all MAC addresses.
	VID	Type the VLAN group identification number.
	Port	Select the port to which the filter rule should be applied. You may choose one port only
		or all ports (All Ports).

Filter Setup 11-3