|
| Chapter 3 - MGC+ Software Installation and Configuration | |
|
|
| |
| Table | ||
|
|
|
|
| Field | Description |
|
|
|
|
|
| Cards | Click this button to automatically detect the IP address | |
| Configuration | and Alias (if known) of the IP+ cards installed on the | |
|
| MCU. | |
The IP+ card type and its slot number, IP address and alias are listed. When the Obtain IP Address automatically (DHCP) check box is selected, the IP address of the card appears as 0.0.0.0.
To configure a specific IP+ card:
Highlighting and then double clicking on any card.
| Enter or change the IP address, and add the card’s |
| Alias if required and click OK. |
|
|
Subnet Mask | Enter the subnet mask of the MCU’s IP+ card. If the |
| DHCP is used, the subnet mask is automatically |
| retrieved from the DHCP server and cannot be |
| modified. For more details, see the MGC Administrators |
| Guide, Chapter 3, “Defining an IP Network Service”. |
