Polycom DOC2231A manual Dns

MGC+50/MGC+100 Getting Started Guide

Table 3-1: IP Configuration Parameters (Continued)

Field	Description
Default Router	Enter the IP address of the default router. If a DHCP is
	used, the IP address of the default router is
	automatically retrieved from the DHCP server and
	cannot be modified.
DNS	Select this check box to indicate that a DNS server is
	used in the network. Then select:
	• Specify - Select this option to enter the IP address
	of the DNS server.
	• Auto - select this option to automatically detect the
	primary DNS IP address, provided the DNS Server
	is defined in the DHCP and if the DHCP -obtain IP
	Address automatically check box was selected.
DNS Server IP	If Specify was selected, enter the IP address of the
Address	primary DNS server to be used.
Local Domain	Enter the domain name where the MCU is installed.
Name	The name of the domain includes the host part of URL
	or URI (the part of the host’s address that appears after
	the at sign (@), or in a URL the part following the www.
	prefix), for example, polycom.com.
	This field is used both for SIP proxy registration
	purposes and DNS resolution and therefore it is
	required if you are using DNS servers in this service.
H.323	Select this option to allow H.323 participants to connect
	to the MCU using this service.
Gatekeeper	If a gatekeeper is used, select the Gatekeeper check
	box to define its properties.
Gatekeeper IP	Enter either the gatekeeper’s host name (if the DNS
Address or	server is used), or IP address.
Name

3-12