![](/images/new-backgrounds/1174873/17487379x1.webp)
MGC+50/MGC+100 Getting Started Guide
Configuring the Network Services
Initial IP
Configuration
Installing the
MGC Manager
The Network Services include the parameters of the networks connected to the MCU. If no Network Services have been configured, depending on your system configuration, the appropriate Network Service must be configured. This section describes the configuration of both IP and ISDN networks.
For information about defining
Starting the MGC
Manager
Defining an MCU
Connecting to an MCU
Configuring the
Network Services
ISDN Network Service
The
IP Network Service
The IP Network Service defines the properties of the IP network connected to the IP+ cards (installed in the MCU). Several of the network components are used by both H.323 and SIP endpoints to connect to the conference, and the same IP+ card is used for H.323 and SIP connections. One IP Network Service, therefore, can be defined for both H.323 and SIP environments as well as an
Defining the Network Services
The first time you connect to the MGC+ unit from the MGC Manager, the system automatically detects that no Network Service is defined in your system and automatically displays the Network Configuration Wizard to let you configure the IP and ISDN Network Services.
If the system detect an ISDN only connection to the MCU, only the ISDN Configuration dialog box opens. If an
You can always access the Fast Configuration Wizard by