|
| MGC+50/MGC+100 Getting Started Guide | |
|
|
|
|
| Table | ||
|
|
|
|
| Option | Description |
|
|
|
|
|
| IP Address | The system displays the currently defined IP address. |
|
|
| Enter the IP address allocated to the MCU by the |
|
|
| network administrator. |
|
|
|
|
|
| Subnet Mask | Enter the Subnet Mask of the MCU. |
|
|
|
|
|
| Default Gateway | Enter the IP Address of the default gateway/router. |
|
|
|
|
|
Make sure no blank spaces occur at the end of each line.
3.Save the changes in the LAN.cfg file.
4.Use the Microsoft Unplug or Eject Hardware procedure prior to removing the Flash disk.
Failure to stop the hardware properly can result in a corrupt Compact Flash disk.
When the disk fails, a replacement is required.
5.Remove the Compact Flash disk from the reader.
6.Insert the Compact Flash disk into the Compact Flash slot of the MGC+ Control Module.
7.Press the Reset button on the MGC+ unit. The Options menu appears.
8.Press 1, to Change the MGC+ IP Settings.
If no monitor is connected, the automatic default
The Flash Memory LED must be active and flash.
