ZyXEL Communications ES-3024 manual Ping Hostid

			Dimension ES-3024 Ethernet Switch
		Table 21-1 command summary
	COMMAND			DESCRIPTION
ping	<hostid>			Pings a remote host.
route
	status [if]			Displays the routing table.
	add			Adds a route.
	<dest_addrdefault>[/<bits>]
	<gateway> [<metric>]
	addiface <dest_addrdefault>			Adds an entry to the routing table
	[/<bits>] <gateway> [<metric>]			for the specified interface.
	addprivate <dest_addrdefault>			Adds a private route.
	[/<bits>] <gateway> [<metric>]
	drop <host addr> [/<bits>]			Drops a route.
status				Displays IP statistic counters.
udp	status			Displays the UDP status.
tcp
	ceiling		[value]	Sets the TCP maximum round trip
				time.
	floor [value]			Sets the TCP minimum round trip
				time.
	irtt	[value]		Sets the TCP default initial round
				trip time.
	kick	<tcb>		Drops the TCP connection of the
				specified TCP Control Block.
	limit [value]			Sets a TCP output window limit.
	mss	[value]		Inputs the TCP Maximum
				Segment Size.
	reset <tcb>			Resets the TCP connection of the
				specified TCP Control Block.
	rtt	<tcb> <value>		Sets the round trip time for the
				TCP control block.
	status		[tcb] [<interval>]	Displays the TCP statistic
				counters.
	syndata		[onoff]	Turns on/off the option to send
				data with the SYN packet.
	trace [onoff]			Turns on/off the trace for
				debugging.
telnet	<host> [port]			Telnets to the specified host.
	support			Shows if TFTP is supported.
	stats			Displays the TFTP status.

Commands Introduction 21-7