Dimension
|
| COMMAND | DESCRIPTION |
|
|
|
|
|
| pathcost <port_no> | Displays the specified port’s path |
|
|
| cost. |
|
| priority <port_no> | Displays the specified port’s |
|
|
| priority. |
|
| edgeport <port_no> | Displays if this port is an edge |
|
|
| port. |
|
| p2plink <port_no> | Displays whether the specified |
|
|
| port can connect to one bridge or |
|
|
| multiple bridges. |
|
| mcheck <port_no> | Enables the Port Protocol |
|
|
| Migration state machine |
|
|
| (Disabled, Blocking, Listening, |
|
|
| Learning, Forwarding) on the |
|
|
| specified port. |
lacp |
|
| Refer to IEEE 802.3ad for more |
|
|
| information on link aggregation |
|
|
| control protocol. |
| agg |
| Displays ports trunked using |
|
|
| LACP. |
| port |
|
|
|
| enable <port_no> | Enables LACP on the specified |
|
|
| port. |
|
| disable <port_no> | Disables LACP on the specified |
|
|
| port. |
|
| status <port_no> | Displays whether LACP is |
|
|
| enabled on the specified port. |
|
| actoradm activity [port_no] | Allows/disallows the specified |
|
| [0:passive 1:active] | local port to engage in trunking. |
|
| actoradm display [port_no] | Shows whether the specified |
|
|
| local port is engaged in trunking. |
|
| actoradm key [port_no][key] | Shows the specified local port |
|
|
| LACP key. |
|
| actoradm priority [port_no] | Shows the specified local port |
|
| [priority] | LACP priority. |
|
| actoradm timeout [port_no] | Enables a short or long timeout |
|
| [0:long_timeout1:short_timeout] | on the specified local port. |
|
| status | Displays LACP status on all |
|
|
| ports. |
|
| keymgnt [onoff] | Turns LACP key management |
|
|
| on or off. |
|
| syspriority <priority> | Sets the LACP system priority. |
|
|
| The switch with the lowest |
|
|
| priority becomes the LACP |
|
|
| “server”. |
dot1x |
|
| “sys sw dot1x” commands relate |
|
|
| to IEEE 802.1X security. |
| Commands Introduction |
