ZyXEL Communications ES-3024 manual 802.1Q Vlan Status

Dimension ES-3024 Ethernet Switch

19.1.4VLAN Status

Click VLAN Status in the Statistics screen to open this screen. Use this screen to check status and membership data about the card’s IEEE 802.1Q VLANs.

	Figure 19-6 802.1Q VLAN Status
	Table 19-5 802.1Q VLAN Status
LABEL	DESCRIPTION
Number of VLAN	This is the number of VLANs configured on the switch.
Index	This is the VLAN index number.
VID	This is the VLAN identification number that was configured in the VLAN Setup screen.
Member	Ports that have been added to this VLAN are listed here in numerical order.
Untagged Port	Untagged ports that have been added to this VLAN are listed here in numerical order.
Elapsed Time	This field shows how long it has been since a normal VLAN was registered or a static
	VLAN was set up.
Status	This field shows how this VLAN was added to the switch; dynamically using GVRP or
	statically, that is, added as a permanent entry.
Poll Interval(s)	The text box displays how often (in seconds) this screen refreshes. You may change the
	refresh interval by typing a new number in the text box and then clicking Set Interval.
Stop	Click Stop to halt polling statistics.
Previous/Next	Click one of these buttons to show the previous/next screen if all status information
Page	cannot be seen in one screen.

Statistics 19-7