JVC CA-FSB70 repeatedly so that the Reverse Mode, indicator lights up like, Recording, English

English

Recording

IMPORTANT:

•It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.

•The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.

•If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit.

•You can only use type I tape for recording.

DO NOT use type II and type IV tapes since the unit is not compatible with such tapes.

The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.

At the start and end of cassette tapes

There is leader tape which cannot be recorded onto. Thus, when recording from discs, FM/AM broadcasts, or external equipment, wind the leader tape first to ensure that the recording will be made without losing any music.

To protect your recordings

Cassettes have two small tabs on the back to protect against unexpected erasure or re-recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with adhesive tape.

Adhesive tape

Recording on a Tape

1 Insert a recordable cassette into the cassette compartment with the exposed part of the tape facing left.

• See also page 20.

2 Check the recording direction for the tape.

•If the tape direction is not correct, press 2 3 TAPE twice then 7 to change the tape direction.

•If you want to record on both sides of a tape, see “To record on both sides—Reverse Mode” below.

3 Start playing the source—FM, AM or auxiliary equipment connected to AUX/DVD jacks.

•When recording from discs, see “Recording Discs— Disc Synchronized Recording” on page 22.

4	Press REC (recording).	REC
	The REC (recording) indicator lights up on
	the display and recording starts.

“NO REC” will appear on the display when you press REC in the following cases:

•If no cassette is inserted.

•If a protected tape is inserted.

•If any tray is open when the source is the CD player.

To stop while recording, press 7.

To remove the cassette, press 0 on the unit.

TAPE

To record on both sides—Reverse Mode

On the remote control ONLY:

Press REV.MODE (reverse mode)		MODE
		REV.
repeatedly so that the Reverse Mode
indicator lights up like—	or	.

•The Reverse Mode indicator lights up on the

display like— while recording.

•Make sure that the tape direction is set to the forward (3) direction before starting to record. Otherwise, recording will stop when only one side (reverse) of the tape is recorded.

To cancel the Reverse Mode, press the button so that the Reverse Mode indicator lights up like—.

21