How do I address power issues?

Check the power cord connection and ensure it is plugged into the AC outlet.

What should I do if my loaded discs or cassettes cannot be ejected?

Follow the specific instructions for disc and cassette ejection provided in the manual.

Why is it impossible to record?

Ensure that the small tabs on the back of the cassette are not removed, and cover any holes with adhesive tape if necessary.

How to address noise interference during broadcasts?

Adjust the position and direction of the AM and FM antennas for better reception.

What should I do if the unit is not responding to the remote control?

Check the batteries, remove any obstruction blocking the remote sensor, and ensure that the unit is within the remote control's range.

Troubleshooting, Symptom, Possible Cause, Action

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

Power does not come on.

No sound is heard.

	Possible Cause		Action
The power cord is not connected to an		Insert the plug into the socket.
AC outlet.

•	Connections are incorrect or loose.	•	Check all connections and make
			corrections. (See pages 6 to 8.)
•	A pair of headphones is connected.	•	Unplug the headphones from the
			PHONES jack.

Hard to listen to broadcasts because of noise.

Loaded discs cannot be ejected.

The disc does not play.

Loaded cassette cannot be ejected.

•Antennas are disconnected.

•The AM loop antenna is too close to the unit.

•The FM antenna is not properly extended and positioned.

•The AC power cord is not plugged in.

•The Disc Lock function is in use.

The disc is upside down.

The Cassette Lock function is in use.

•Reconnect the antenna correctly and securely.

•Change the position and direction of the AM loop antenna.

•Extend FM antenna and orient to the best reception position.

•Plug in the AC power cord.

•Cancel the Disc Lock function. (See page 19.)

Put the disc in with the label side up.

Cancel the Cassette Lock function. (See page 20.)

Impossible to record.

Small tabs on the back of the cassette are Cover the holes with adhesive tape. removed.

Operations are disabled.

Unable to operate the unit by the remote control.

The built-in microprocessor has malfunctioned due to external electrical interference.

•The path between the remote control and the remote sensor on the unit is blocked.

•The batteries are exhausted.

•You are using the remote control too far from the unit.

Unplug the AC power cord then plug it back in.

•Remove the obstruction.

•Replace the batteries. (See page 8.)

•Signals cannot reach the remote sensor. Move closer to the unit.

JVC CA-FSB70 manual Troubleshooting, Symptom, Possible Cause, Action

Models: CA-FSB70