JVC CA-FSB70 Using the Timers, Using the Daily Timer and the Recording Timer, Press CLOCK/TIMER

Using the Timers

Three timers are available—Recording Timer, Daily Timer and Sleep Timer.

•Before using these timers, make sure the built-in clock is set correctly (see page 9).

Using the Daily Timer and the Recording Timer

You can set the timer when the unit is either turned on or in standby mode.

How the timer actually works

When the on-time comes, the unit automatically turns on (the

On the remote control ONLY:

1 Press CLOCK/TIMER.	CLOCK/
	TIMER

The (timer) indicator lights up and the timer mode indicator (DAILY or REC) flashes on the display.

The unit enters the on-time setting mode.

DAILY

(timer) indicator flashes just before the on-time and continues flashing while the timer is operating). Then, when the off-time comes, the unit automatically turns off (standby). The timer setting remains in memory until you change it.

•	When the DAILY indicator is lit on the display, the timer
	acts as the Daily Timer. Once the timer has been set, it will
	be activated at the same time everyday until the timer is
	turned off.
•	When the REC indicator is lit on the display, the timer acts
	as the Recording Timer. After the timed-recording finishes,
	the details of the setting remain stored but the timer is

Ex.: When the Daily Timer has been selected the last time.

2 Set the on-time you want the unit to turn on.

1)Press UP or DOWN to set the hour, then press CLOCK/TIMER.

2)Press UP or DOWN to set the minute, then press CLOCK/TIMER.

The unit enters the off-time setting mode.

UP

DOWN

CLOCK/

TIMER

turned off.

Before you start...

When using “TUNER” as the source to play, make sure to select the desired station before turning off the power.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 1.

DAILY

3 Set the off-time you want the unit					UP
	to turn off.
	1)	Press	UP or	DOWN to set the	DOWN
		hour, then press CLOCK/TIMER.
	2)	Press	UP or	DOWN to set the
		minute, then press CLOCK/TIMER.
	The unit enters the source setting mode.				CLOCK/
					TIMER
				DAILY

25