JVC CA-FSB70 manual Playing Back Tapes, Playing Back a Tape, Prohibiting Cassette Ejection

Playing Back Tapes

Playing Back a Tape

You can play back type I tapes.

1 Insert a cassette into the cassette compartment with the exposed part of the tape facing left.

•When the unit is turned on, the and tape operation indicators appear on the display.

To remove the cassette, push 0 on the unit.
The	and tape operation indicators go off.	TAPE

Pressing 0 (tape eject) button also turns on the unit.

DO NOT press 0 during tape play.

2 Press 2 3 TAPE.	23
	TAPE
Playback starts (if the unit is in standby, the
unit automatically turns on).
To change the tape direction, press 2 3 TAPE.

•Each time you press the button, the tape direction changes as follows:

:Plays the front side.

:Plays the reverse side.

Tape direction and Reverse Mode indicators

1 2 3 4 5

TAPE

Tape direction

When the tape plays to the end, the deck automatically

stops if the reverse mode is set to or . (See “To play both sides—Reverse Mode” on the right column.)

To stop during play, press 7.

To fast-wind or rewind the tape, press 4 or ¢ (or ¢ UP or 4 DOWN

on the unit).

• When the tape direction is

¢ (¢ UP): Fast-winds the tape.

4(4 DOWN): Rewinds the tape.

•When the tape direction is

4(4 DOWN): Fast-winds the tape.

¢ (¢ UP): Rewinds the tape.

The tape direction indicator (3 or 2) starts flashing rapidly on the display.

To play both sides—Reverse Mode

You can set the deck to play just one side or both sides of a tape once, or both sides continuously.

Press REV.MODE (reverse mode).	REV.
	MODE

•Each time you press the button, the reverse mode changes as follows:

: Plays back only one side (front or reverse).

: Plays back the front and reverse sides once. : Plays back both front and reverse sides

continuously.

• The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.

•You can also play back type II and type IV tapes; however, the sound quality (tone) may not be reproduced properly.

Prohibiting Cassette Ejection

You can prohibit cassette ejection from the unit and can lock the cassette in the cassette compartment—Cassette Lock. You can lock or unlock the cassette when the unit is either turned on or in standby mode.

On the unit ONLY:

To prohibit cassette ejection, while holding 7, press .

“LOCKED” appears on the display

for a while, and the loaded cassette is locked.

• The loaded discs are also locked. (See page 19.)

If you try to eject a locked cassette, “LOCKED” appears to inform you that the Cassette Lock is in use.

To cancel the prohibition and unlock the cassette, repeat the above procedure.

“UNLOCKED” appears on the display for a while, and the loaded cassette is unlocked.

20