JVC CA-FSB70 manual Playing at Random-Random Play

3/8

CD

PLAY

MODE

Continued

English

4 Press the number buttons to							1
	select a track from the disc						4
	selected in the above step.						7
	• For how to use the number buttons, see
	“To go to another track directly using the						10
	number buttons” on the previous page.
		Track number				Total playing time
	1	2	3	4	5
	CD	PRGM

2 3

56

89

+10

If you try to program a 33rd track

“MEMORY FULL” will appear on the display.

When “NO PROGRAM” appears on the display

•You are trying to program a track from an empty tray, or a track number that does not exist on the disc.

•You are selecting the disc that the unit has not read yet.

If the total playing time exceeds 100 minutes

The total playing time on the display will not be shown. “– – : – –” will appear.

5 Program other tracks you want.

•To program tracks from the same disc, repeat step 4.

•To program tracks from a different disc, repeat steps 3 and 4.

6 Press 3/8 CD.

The tracks are played in the order you have programed.

To stop during play, press 7.

To exit from the Program Play mode, before or after play, press PLAY MODE once or twice so that the unit enters another disc playback mode (Random Play or Continuous Play).

The PRGM indicator goes off.

•Turning off the unit also cancels Program Play and changes the disc playback mode to Continuous Play.

To check the program contents

Before playing, you can check the program contents by pressing ¢ or

4.

•¢: Shows the programed tracks in the programed order.

•4: Shows them in the reverse order.

•Pressing 4 first time after you have programed shows the first track in the program.

Playing at Random—Random Play

The tracks of all loaded discs will play at random.

On the remote control ONLY:

1 Load discs into the 5-CD Changer.

•If the current playing source is not “CD,” press 3/8 CD, then 7 before going to the next step.

2	Press PLAY MODE repeatedly until	PLAY
		MODE
	“CD RANDOM” appears on the
	display.

The RANDOM indicator also lights on the display.

RANDOM indicator

1 2 3 4 5

CD RANDOM

•Each time you press the button, play mode changes as follows:

CD PROGRAM			CD RANDOM
(Program Play)			(Random Play)
	Standard display
	(Continuous Play)
3 Press 3/8 CD.		3/8
				CD

The tracks are played at random.

Random Play stops when all the tracks are played once.

To modify the program

Before playing, you can erase the last programed	CANCEL
track by pressing CANCEL.
Each time you press the button, the last
programed track is erased from the program.

To add tracks to the program before playing, simply select disc numbers and track numbers you want to add by following steps 3 and 4.

•In the Program Play mode, you cannot exchange a disc to add tracks on another disc to the program. (You cannot open the disc trays.)

To stop during play, press 7.

•Opening a disc tray also stops and cancels Random Play.

To skip the current track, press ¢.

•The 4 button does not work during Random Play.

18