JVC CA-FSB70 manual Load discs into the 5-CDChanger, Press REC

All Discs Synchronized Recording

1 Insert a recordable cassette into the cassette compartment with the exposed part of the tape facing left.

2 Load discs into the 5-CD Changer.

•You can make a program (see page 17) or select the Random Play mode (see page 18) if you want. In this case, you cannot select the starting disc

= go to step 5.

To stop while recording, press 7.

The tape stops after 4 seconds.

To remove the cassette, press 0 on the unit.

TAPE

When recording discs

A 4-second blank is automatically made on the tape before each

3 Press one of the disc number buttons (CD 1 – CD 5) on the remote control to select the disc you want to start recording from, then press 7.

4 Press CD REC MODE on the remote control to select “ALL CD.”

Each time you press the button, The recording mode changes as follows:

CD 1

CD 2

CD 3

CD 4

CD 5

CD REC

MODE

track. To record without the blank, follow the procedure below:

1Load discs you want to record into the 5-CD Changer.

2Press DISC SELECT on the unit to select the disc number you have loaded.

3Press #/8 CD on the unit twice so that disc playback is paused.

•If the pausing position is not “0:00,” you can skip back to “0:00” by pressing 4 DOWN on the unit.

4Press REC on the unit to start recording.

When all loaded discs are recorded, recording will stop.

You cannot exchange a disc while recording another disc.

1 CD ALL CD 1ST TRACK

Pressing CD REC MODE changes the disc playback mode to

Continuous Play and cancels the Repeat Play mode.

1 2 3 4 5

CD

REC

5 Press REC.

The REC indicator lights up on the display and recording starts.

1 2 3 4 5

CD REC

Current track number Elapsed playing time

When all loaded discs are recorded, recording will stop. Both the 5-CD changer and the cassette deck stop automatically.

23