Braun 3790, 3590, 3570 manual Description see, How to epilate, Some useful tips

In general, the skin reaction and the sensation of pain tend to diminish considerably with the repeated use of Silk·épil.

In some cases inflammation of the skin could occur when bacteria penetrate the skin (e.g. when sliding the appliance over the skin). Thorough cleaning of the epilation head before each use will minimise the risk of infection.

If you have any doubts about using this appliance, please consult your physi- cian. In the following cases, this ap- pliance should only be used after prior consultation with a physician:

–eczema, wounds, inflamed skin reactions such as folliculitis (purulent hair follicles) and varicose veins

–around moles

–reduced immunity of the skin, e.g. diabetes mellitus, during pregnancy, Raynaud’s disease

–haemophilia or immune deficiency.

Some useful tips

Epilation is easier and more com- fortable when the hair is at the optimum length of 2-5 mm (0,08-0,2 in.)

If hairs are longer, we recommend that you either shave first and epilate the shorter re-growing hairs after 1 or 2 weeks.

When epilating for the first time, it is advisable to epilate in the evening, so that any possible reddening can disappear overnight. To relax the skin we recommend applying a moisture cream after epilation.

Fine hair which re-grows might not grow up to the skin surface. The regular use of massage sponges (e.g. after showering)

or exfoliation peelings helps to prevent in-growing hair as the gentle scrubbing action removes the upper skin layer and fine hair can get through to the skin surface.

Description (see page 4)

14-way moving pain softener

2 Epilation head

B Underarm epilation head 3 Release buttons

4 Switch

5 Socket for cord connector

6 Cord connector

7 12 V transformer plug

How to epilate

•Your skin must be dry and free from grease or cream.

•Keep in mind that epilation is more comfortable when the hair is at the optimum length of 2-5 mm (see section «Some useful tips»).

•Before starting, thoroughly clean the epilation heads 2 and B.

•For leg epilation, choose epilation head 2, put it on and make sure that the 4-way moving pain softener 1 is in place.

•For underarm and bikini line epilation,

we recommend that you use the underarm epilation head B.

•To change epilation heads, press the release buttons 3 on the left and the right and pull off the epilation head.

•Plug the cord connector 6 into the socket 5 and plug the transformer plug 7 into an electrical outlet.

1To turn on the appliance, slide switch 4 to setting « 2 » (« 2 » = normal speed, « 1 » = reduced speed).

7