Q-Logic SN0054621-00 E Installing on Red Hat/SUSE Linux/PPC, Installing on Solaris SPARC/Solaris

2 – Installation and Removal Installing SANsurfer iSCSI HBA CLI

S

Overwrite Previous Windows Installations

Type the following for an installation that overwrites any previous installations without asking for confirmation. Type:

SANsurferX-AgentOnly.msi /i FORCEINSTALL=TRUE

Installing on Red Hat/SUSE Linux/PPC

SANsurfer iSCSI HBA CLI installation on a Linux system requires that you use the “quiet” installation method. This method ensures that, if needed, the Linux driver interface module (ioctl module) is also installed.

To install quietly on Linux:

1.Unzip and untar the iSCSI CLI gzipped tar bundle as follows: tar -xvzf

2.To start the installation, type:

./iscli.dkms.install.sh install

Installing on Solaris SPARC/Solaris x86

You can install SANsurfer iSCSI HBA CLI on a Solaris SPARC or x86 system with one of the following methods:

„“Solaris Attended Installation” on page 2-10

„“Solaris Silent Installation” on page 2-11

Solaris Attended Installation

Follow this procedure from the command prompt to install SANsurfer iSCSI HBA CLI on a Solaris SPARC/Solaris x86 operating system.

To install attended on Solaris:

1.To uncompress the package you downloaded in “Downloading the Installation Package” on page 2-1, type the following:

uncompress iscli-AA.BB.CC-DD_solaris_sparc_x86.Z

2.To install iSANsurfer iSCSI HBA CLI on a Solaris SPARC/Solaris x86 operating system, type the following:

pkgadd -d iscli-AA.BB.CC-DD_solaris_sparc_x86

Solaris puts the files in the following directory:

/opt/QLogic_Corporation/SANsurferiCLI

It also adds this directory to the execution path.

2-10 SN0054621-00 E