Q-Logic SN0054621-00 E manual Help, Select HBA Port, Refresh

A

4 – Interactive Mode Commands Help (CLI Option -h)

Help

(CLI Option -h)

Select the Help option to view the SANsurfer iSCSI HBA CLI help file, which contains a list of non-interactive mode commands and the syntax of each.

You can also obtain assistance by entering the -hcommand; see “-h (Help)” on page 5-13.

Select HBA Port

(No CLI Option)

Select the Select HBA Port option to get a list of all installed HBAs and their parameters, including the following information:

„HBA number (in this system)

„HBA Port Index (which port this is in the list of all system iSCSI ports)

„HBA model (for example, QLA4052C)

„HBA serial number

„Firmware version

„Type of connection (Copper or Optical)

„IP Address

„Alias

„iSCSI Name

The display looks similar to the following:

1.HBA: 0 Port: 0 HBA Port Index: 1 HBA Model: QLA4050C

HBA Serial Number: (FS10506A02810)FW Version: 2.2.4.45 Type: Copper

IP Address: 192.168.104.129 Alias:

iSCSI name: iqn.2000-04.com.qlogic.qla4050c.fs10506a02810.1

Type the Port Index number for the HBA Port Instance you want to view or change, and then press ENTER.

Refresh

(No CLI Option)

To update the firmware with the changes made on this menu, and to be sure you can see your changes in the CLI, type the number for the Refresh option, and then press ENTER.

SN0054621-00 E 4-49