Q-Logic SN0054621-00 E manual List Targets, Display Target Information CLI Option -t, Hba Cli

A

4 – Interactive Mode Commands Port Level Info & Operations Menu

4.For each submenu, save the changes by typing the number for the Save Target/CHAP changes option, and then pressing ENTER.

5.Type the number for the Refresh option, and then press ENTER. If you do not select this option, your changes will not be visible in SANsurfer iSCSI

HBA CLI.

List Targets

(CLI Option -t)

To list all targets connected to the current working adapter, type the number for the List Targets option, and then press ENTER. The following information is displayed for each target:

„Target ID (target ID of this device as assigned by the QLogic tool)

„HBA number

„IP (IP address of the target)

„Port instance (port ID for iSCSI devices, as defined by the iSCSI standard)

„iSCSI name (target iSCSI name, as defined by the iSCSI standard)

„Alias (target iSCSI alias name, as defined by the manufacturer software)

„State (of the target session connection). Session states include:

‰Unassigned

‰No Connection

‰Discovering

‰Not Saved

‰No Session

‰Session Active

‰Logged out

‰Session Failed

‰Unknown

Display Target Information

(CLI Option -t)

Select the Display Target Information option to view the same information shown for the List Targets option. At the Enter a Target ID: prompt, type the ID of the target for which you want to see more detailed information, and then press ENTER.

The following shows an example of target information:

Target ID: 2 hba_no: 5 IP: 10.14.64.154 Port: 3260 TGT Instance #: 2 ISCSI Name: iqn.1987-05.com.cisco:00.28182218624e.chap4 Alias: chap4

State: Session Active

TGT_iSCSI_Name: iqn.1987-05.com.cisco:00.28182218624e.chap4

TGT_Target_ID : 2(*)

SN0054621-00 E 4-37