Q-Logic SN0054621-00 E manual Configure Basic Settings, Configure Advanced Settings, „ Tcpdhcp

4 – Interactive Mode Commands Port Level Info & Operations Menu

S

Configure Basic Settings

Select the Configure Basic Settings option to modify the following settings (listed here in alphabetic order):

„ENABLE_4022IPv4

„ENABLE_IPv4

„ENABLE_IPv6

„IP_Address

„IP_Gateway

„IP_Subnet_Mask

„IPv6_Addr_Local_Link

„iSCSI_Alias

„iSCSI_Discovery_Logout

„iSCSI_Strict_Login

„LDROUTER_AUTO

„LOC_LINK_AUTO

„ROUTABLE_AUTO

„Task_Management_Timeout

„TCP_DHCP

„TCP_Nagle

Each setting is displayed with the current value in brackets, for example:

Task_Management_Timeout [10] :

To change the value, type the new value after the prompt. To keep the current value, press ENTER at the prompt. SANsurfer iSCSI HBA CLI displays the next device setting. The settings are displayed one by one (but not alphabetically, as in the preceding bullet list).

Table A-1 on page A-1describes these settings.

Configure Advanced Settings

Select the Configure Advanced Settings option to modify the following settings (listed here in alphabetic order):

„AFW_AutoConnect

„AFW_Delayed_Ack

„AFW_Device_Timeout

„AFW_Serlz_Task_Mngmt

„ExeThrottle

„FirstBurstLen

„Force_Negotiate_Main_iSCSI_Keys

„FW_ZIO_Enable_Mode

„IP_ARP_Redirect

„IPv4_TOS_Enable

„IPv4TOS

„IPv4TTL

4-26 SN0054621-00 E