Q-Logic SN0054621-00 E Add a Default Bidi Chap, Edit a Chap Entry, To add a default Bidi Chap

A

4 – Interactive Mode Commands Port Level Info & Operations Menu

Add a Default BIDI CHAP

(CLI Option -defbidi)

A default bidirectional (BIDI) CHAP causes the HBA to authenticate only the CHAP secrets of all targets with CHAP (the CHAP names are ignored). In addition, the CHAP names of any bidirectional CHAP entries are ignored.

To add a default BIDI CHAP:

1.On the HBA CHAP Menu, type 5 (Add a Default BIDI CHAP), and then press ENTER.

2.At the CHAPSecret [default secret] prompt, do one of the following:

‰Type the name of an existing CHAP secret you want to use, and then press ENTER.

‰To use the default secret displayed in the prompt, press ENTER.

3.At the Press the Enter key to continue prompt, press ENTER.

You can add a BIDI CHAP entry with the -defbibi command. See “-defbidi (Add a Default BIDI CHAP)” on page 5-7.

Edit a CHAP Entry

(CLI Option -edchap)

To edit a CHAP entry:

1.On the HBA CHAP Menu, type 6 (Edit a CHAP entry), and then press

ENTER.

The CHAP table is displayed.

2.Press ENTER.

3.At the prompt, type the number of the CHAP entry you want to change, and then press ENTER.

4.At the CHAPName [default name] prompt, do one of the following:

‰Type a new CHAP name, and then press ENTER.

‰To use the default CHAP name shown in the prompt, press ENTER.

5.At the CHAPSecret [default name] prompt, do one of the following:

‰Type a new CHAP secret, and then press ENTER.

‰To use the default CHAP secret shown in the prompt, and then press

ENTER.

6.At the CHAPBidi [off or on] prompt, do one of the following:

‰If you want the HBA to authenticate the target (bidirectional CHAP) and the prompt is CHAPBidi [off], type on, and then press ENTER. If the prompt is CHAPBidi [on], press ENTER.

SN0054621-00 E 4-43