HP 16500C, 16501A LOGIC manual Measurement Initialization Error

If You Have a Problem

“Measurement Initialization Error”

“Measurement Initialization Error”

This error occurs when you have installed the cables incorrectly for one or two HP 16550A logic analysis cards. The following diagrams show the correct cable connections for one-card and two-card installations. Ensure that your cable connections match the drawing, then repeat the measurement.

Cable Connections for One-Card HP 16550A Installations

	Cable Connections for Two-Card HP 16550A Installations
See Also	The HP 16550A 100-MHz State/500-MHz Timing Logic Analyzer Service
	Guide.

5–13