Triggering
To capture a write of known bad data to a particular variable
To capture a write of known bad data to a particular variable
The trigger specification ANDs the bad data on the data bus, write transaction on the status bus, and address of the variable on the address bus.
1Select the state analyzer Trigger menu.
2Define the terms BAD_DATA, WRITE, and VAR_ADDR to represent the bad data value, write status, and the address of the variable.
3Under State Sequence Levels, enter the following sequence specification:
∙While storing “anystate” TRIGGER on “BAD_DATA ∙ WRITE ∙
VAR_ADDR” one time (you use the Combination trigger term to do this)
∙Store “anystate”
