HP 16501A LOGIC, 16500C manual Special displays, Skew Adjustment, Contents

Contents

To capture state flow showing how your target system processes an interrupt 2–16

To test a circuit using stimulus-response 2–17

To use a state analyzer to trigger timing analysis of a count-down on a set of data lines 2–18

To monitor the activity of two coprocessors in a target system 2–19

Special displays 2–21

To interleave trace lists 2–22

To view trace lists and waveforms together on the same display 2–24

Skew Adjustment 2–26

To adjust for minimum skew between two modules involved in an intermodule measurement 2–27

3 File Management
Transferring Files Using the Flexible Disk Drive		3–3
To save a measurement configuration	3–4
To load a measurement configuration	3–6
To save a trace list in ASCII format 3–8
To save a menu or measurement as a graphic image		3–10
To load system software 3–12

Using the LAN Interface	3–13
To set up the HP 16500C	3–14
To transfer data files from the HP 16500C system to your computer 3–16

To transfer graphics files from the HP 16500C system to your computer 3–18

viii