Q-Logic SN0054621-00 E manual Ping Target see

A

4 – Interactive Mode Commands

Table 4-1. Command Line Interface Menu (Continued)

Level 1	Level 2	Level 3		Level 4
	5. Port Diagnostic Menu (see page 4-29)
		1.	Ping Target (see page 4-30)
		2.	Perform Loopback Test (see page 4-31)
		3.	Perform Read/Write Buffer Test (see page 4-31)
		4.	Display Port Statistics (see page 4-32)
		5.	Reset Statistics (see page 4-32)
		6.	Display ARP Table (see page 4-32)
		7.	Display Connection Error Log (see page 4-32)
		8.	Export Connection Error Log (see page 4-33)
		9.	Display Neighbor Cache (IPv6) (see page 4-33)
		10.	Display Destination Cache (IPv6) (see page 4-33)
		11. Display Default Router List (IPv6) (see page 4-33)
		12.	Display Local Prefix List (IPv6) (see page 4-33)
		13.	Select HBA Port (see page 4-49)
		14.	Refresh (see page 4-49)
		15.	Exit (see page 4-50)
	6. BIOS/UEFI [or FCode] Settings Menu (see page 4-34)
		1.	Display BIOS/UEFI [or FCode] Information (see page 4-35)
		2.	Set BIOS/UEFI Mode (see page 4-35)
		3.	Set Primary Boot Target Information (see page 4-35)
		4.	Set Secondary Boot Target Information (see page 4-35)
		5.	Clear Primary Boot Target Information (see page 4-36)
		6.	Clear Secondary Boot Target Information (see page 4-36)
		7.	Set Alternative Client ID (see page 4-36)
		8.	Save Changes and Reset HBA (see page 4-18)
		9.	Select HBA Port (see page 4-49)
		10.	Refresh (see page 4-49)

11. Exit (see page 4-50)

SN0054621-00 E 4-5