Q-Logic SN0054621-00 E manual Port Level Info & Operations see

A

4 – Interactive Mode Commands

Table 4-1. Command Line Interface Menu (Continued)

Level 1	Level 2		Level 3		Level 4
	4.	HBA Diagnostic Menu (see page 4-15)
			1.	Retrieve FW Crash Record (see page 4-15)
			2.	Retrieve FW Flash & NVRAM Record (see page 4-15)
			3.	Retrieve FW Coredump Record (see page 4-16)
			4.	Display HBA Level Statistics (see page 4-16)
			5.	Select HBA Port (see page 4-49)
			6.	Refresh (see page 4-49)
			7.	Exit (see page 4-50)
	5.	HBA Level Parameters Menu (see page 4-17)
			1.	Display HBA Level Parameters (see page 4-17)
			2.	Configure HBA Level Parameters (see page 4-18)
			3.	Select HBA Port (see page 4-49)
			4.	Save Changes and Reset HBA (see page 4-18)
			5.	Refresh (see page 4-49)
			6.	Exit (see page 4-50)
	6.	Display VPD Information (see page 4-18)
	7.	Select HBA Port (see page 4-11)
	8.	Refresh (see page 4-49)
	9.	Exit (see page 4-50)
4. Port Level Info & Operations (see page 4-19)
	1.	Port Link Settings Menu (see page 4-19)
			1.	Display Active Link Configuration (see page 4-19)
			2.	Display Configured Link Configuration (see page 4-20)
			3.	Configure Link Configuration (see page 4-20)
			4.	Save Changes and Reset HBA (if necessary) (see page 4-18)
			5.	Select HBA Port (see page 4-49)
			6.	Refresh (see page 4-49)
			7.	Exit (see page 4-50)

SN0054621-00 E 4-3