Q-Logic SN0054621-00 E manual List All QLogic iSCSI HBA Ports Detected

5– Non-Interactive Mode Commands Non-interactive Commands

S

-i

(List All QLogic iSCSI HBA Ports Detected)

Use the -icommand to view a list of all detected HBA port instances (“ports”) in the system. Each port instance (hba_port_inst) is identified by its number.

To view general HBA information, enter the -icommand as follows:

-i [hba_port_inst]

When you use hba_port_inst, information for only that HBA port instance is shown. When you do not use hba_port_inst, information for all ports in the system is shown.

The following HBA (port) information is shown:

„Item number (order in which ports were detected)

„HBA number, that is, the number of this HBA in the detection process

„HBA port number (0 or 1) for this HBA

„Port instance number in the system (two-port HBAs appear twice)

„Port Instance on the HBA

„HBA model number (for example, QLA4010)

„HBA serial number (for example, TFC0105C51704)

„Firmware version (for example, 3.0.1.45)

„Connection medium

„IP address (IP address of the HBA port instance)

„iSCSI name (HBA port iSCSI name; the QLogic default name or one you assign)

„Alias (HBA port instance iSCSI alias name that you assign)

Figure 5-1shows how to read the display.

HBA 0 (First HBA	HBA Port Instance 0
detected in system)	(First detected in system)

0. HBA: 0 Port: 0 HBA Port Instance: 0 HBA Model: QLA4050C

Item 0 Port 0 on this HBA HBA Model Number

Figure 5-1 HBA Port Information

5-14 SN0054621-00 E