Q-Logic SN0054621-00 E manual Display BIOS/UEFI or FCode Information, Set BIOS/UEFI or FCode Mode

A

4 – Interactive Mode Commands Port Level Info & Operations Menu

Display BIOS/UEFI [or FCode] Information

(CLI Option -binfo)

Select the Display BIOS/UEFI Information or Display FCode Information option (this menu option varies depending on your system architecture) to view information about the bootcode. For example:

BIOS Mode: Disabled (0x1)
BIOS Primary Target ID:		2	LUN: 0
BIOS Secondary Target ID: 2			LUN: 0
BIOS Vendor ID =
BIOS Alt Client ID	= testod
BIOS Version: 1.14
BIOS Full Version:	1.14

Set BIOS/UEFI [or FCode] Mode

(CLI Option -bootcodemode)

NOTE:

If the BIOS version is less than 1.04, this option is not supported (it displays an error message).

Select the Set BIOS/UEFI Mode or Set FCode Mode option (depending on your system architecture) to select the bootcode mode. For example:

Choose from one of the following modes:

1)BIOS/UEFI [or FCode] Boot Disabled

2)BIOS/UEFI [or FCode] Boot Manual Mode

3)BIOS/UEFI [or FCode] Boot DHCP-Root Path

For more information, refer to the parameters listed in C Target Parameters.

Set Primary Boot Target Information

(CLI Option -pbootcode)

Select the Set Primary Boot Target Information option to select the primary target to boot from. At the prompt, type a target ID and associated LUN.

Set Secondary Boot Target Information

(CLI Option -sbootcode)

Select the Set Secondary Boot Target Information option to select the secondary target to boot from. At the prompt, type a target ID and associated LUN.

SN0054621-00 E 4-35