Q-Logic SN0054621-00 E Target Level Info & Operations, Clear Primary Boot Target Information

4 – Interactive Mode Commands Port Level Info & Operations Menu

Clear Primary Boot Target Information

(CLI Option -cpbootcode)

S

Select the Clear Primary Boot Target Information option to disable the primary boot target. At the prompt, type a target ID and associated LUN.

Clear Secondary Boot Target Information

(CLI Option -csbootcode)

Select the Clear Secondary Boot Target Information option to disable the secondary boot target. At the prompt, type a target ID and associated LUN.

Set Alternative Client ID

(CLI Option -sbootcodecid)

Select the Set Alternative Client ID option to assign an optional alternative client ID, which can be used in boot DHCP mode. The ID can be seven characters maximum.

Target Level Info & Operations

Before making a selection from the HBA Target Menu, follow these steps:

1.Specify the HBA port whose settings you want to view or change by typing the number for Select HBA Port, and then press ENTER.

A list of HBA ports is displayed.

2.Type the number for the HBA port whose settings you want to change, and then press ENTER.

3.To make changes, select options from the following submenus:

1.List Targets (see page 4-37)

2.Display Target Information (see page 4-37)

3.Bind Target (see page 4-39)

4.Delete Target (see page 4-39)

5.Configure Target Parameters (see page 4-39)

6.Add a Target (see page 4-40)

7.Disable a Target (see page 4-40)

8.Enable a Target (see page 4-40)

9.Configure Target Authentication Menu (CHAP) (see page 4-40)

10.Target Discovery Menu (see page 4-44)

11.List LUN Information (see page 4-47)

12.Save Target/CHAP Changes (see page 4-47)

13.Select HBA Port (see page 4-49)

14.Refresh (see page 4-49)

15.Exit (see page 4-50)

4-36 SN0054621-00 E