Q-Logic SN0054621-00 E manual Typographic Conventions

1 – Introduction

How This Guide is Organized

S

„Appendix A Port- and HBA-level Parameters provides an alphabetic list of the HBA port firmware parameters and their values.

„Appendix B HBA Statistics provides an alphabetic list of the HBA statistics shown when you select either the interactive mode Display HBA Statistics option or the non-interactive mode -statcommand.

„Appendix C Target Parameters provides an alphabetic list of target parameters, both fixed and configurable.

„Appendix D Error Codes provides an alphabetic list of the error codes that can occur while running SANsurfer iSCSI HBA CLI in both interactive mode and non-interactive mode.

„Appendix E Downloadable File Names lists, by file type and HBA, the typical file names of downloadable files for QLogic iSCSI HBAs.

„Appendix F Using Trace provides information for using trace to identify application, HBA, and networking issues.

Following the appendices are a glossary of terms used and an index that will help you quickly find the information you need.

Typographic Conventions

This guide uses the following typographic conventions:

„Text in bold font indicates a menu or menu item. For example:

From the HBA Import Menu, type the number for the Import option, and then press ENTER.

„Text in a sans serif font (Courier New) indicates CLI window text output. For example:

Enter an IP Address:

„Text in a bold sans serif font (Courier New) indicates user input (what you type). For example:

Type y for the Stop on error[Y]? option.

„Text in ALL CAPITALS and sans serif font indicates the name of a key that you press on the keyboard. For example:

Type the number for Host Information and then press ENTER.

„Italicized text indicates either a document reference, glossary term, or emphasis. For example:

The HBA port alias is a symbolic name you assign.

For a complete list, see the QLogic SAN Interoperability Guide.

1-2 SN0054621-00 E