Q-Logic SN0054621-00 E manual HBA Reset, Update ROM Image

4 – Interactive Mode Commands

HBA Level Info & Operations Menu (CLI Option -i)

S

CAUTION!

„Before updating the firmware image, be sure that no I/O processes are running.

„An administrator must take necessary actions to ensure changes will be fully recognized by the operating system (reboot, flush cache, sync disk, and so forth.)

„A firmware update and reset will be performed that requires all applications accessing impacted LUNs to be shut down.

„Any impacted systems must be unmounted.

„Following firmware update, be sure to select Save changes and reset HBA; otherwise, the change will not take effect.

Update ROM Image

(CLI Option -r)

Select the Update ROM Image option to update the ROM image. At the prompt, type the name of the file containing the ROM image to upload to the HBA.

For information on ROM Image file names, see Appendix E Downloadable File Names.

CAUTION!

„Before attempting to update the ROM image, contact QLogic Customer Support (support@qlogic.com).

„Before updating the ROM image, ensure that no I/O processes are running.

„An administrator must take necessary actions to ensure changes will be fully recognized by the operating system (reboot, flush cache, sync disk, and so forth).

„A ROM update and reset will be performed that requires all applications accessing impacted LUNs to be shut down.

„Any impacted systems must be unmounted.

„To ensure your changes take effect, be sure to select Save changes and reset HBA.

HBA Reset

(CLI Option -b)

Select the HBA Reset option to reset the HBA after making configuration changes.

4-14 SN0054621-00 E