Q-Logic SN0054621-00 E Coreerrinitfwinvalid, Coreerrsetbootcode, Coreerrinvlun, Coreerrnoluninfo

A

D – Error Codes Interactive Mode Error Codes

Table D-1. Interactive-Mode Error Code Descriptions (Continued)

Return	Name	Description
138	CORE_ERR_INITFW_INVALID	Invalid IP address in InitFW. Correct to save
		changes.
139	CORE_ERR_SETBOOTCODE	Bootcode save error.
140	CORE_ERR_INV_LUN	LUN is invalid.
141	CORE_ERR_NO_LUN_INFO	Cannot get LUN information for this target.
142	CORE_ERR_NOT_SUPPORTED_BY_	Operation unsupported in current firmware ver-
	FW	sion.
143	CORE_ERR_BOOTCODE_ENABLED	Operation not allowed with BOOTCODE is
		enabled.
144	CORE_ERR_BOOTCODE_INVALID_	Vendor ID can only be 8 characters long.
	VENDORID
145	CORE_ERR_BOOTCODE_INVALID_	Alt Client ID can only be 7 characters long.
	ALTCLIENTID
146	CORE_ERR_BOOTCODE_MODE_	Invalid Bootcode Mode.
	INVALID	Bootcode Mode not allowed for QLA4010.
		For other HBAs with HBA DHCP off, allowed
		modes are 1 and 2, with HBA DHCP on. Mode 3
		is also allowed.
147	CORE_ERR_NO_IMP_HBAS	No HBAs in specified file to import.
148	CORE_ERR_PARSING_ERROR	Parsing error in the specified file.
149	CORE_ERR_INVALID_SOURCE_HBA	Invalid source HBA provided for import.
150	CORE_ERR_BOOTCODE_CHECKSUM	Checksum test failed: corrupt bootcode file or
	_FAILURE	problems during download.
		Bootcode erased to avoid major HBA failure.
151	CORE_ERR_BOOT_TARGET	Target is a boot target & bootcode boot is
		enabled.
152	CORE_ERR_ZIP_FILE_NOT_FOUND	Driver zip/inf file not found.
153	CORE_ERR_UNABLE_TO_UNZIP_	Unable to unzip driver file.
	DRIVER_FILE
154	CORE_ERR_UNBLE_TO_GET_DRIVER	Unable to get driver version from the driver file.
	_VERSION_FROM_DRIVER_FILE
155	CORE_ERR_UNABLE_TO_GET_INFO_	Unable to get info from driver file.
	FROM_DIRVER_FILE

SN0054621-00 E D-3