Q-Logic SN0054621-00 E manual Display Default Router List IPv6 only

5– Non-Interactive Mode Commands Non-interactive Commands

S

-df

To view the firmware properties, enter the -dfcommand as follows:

-df<hba_port_inst>

SANsurfer iSCSI HBA CLI displays information about the HBA: model, serial number, port number, iSCSI name, alias, IP address, instance number, and the following firmware information:

„FW information for instance

„FW version

„FW attribute

„FW version 2

„FW attribute 2

There is no corresponding command in the interactive menu.

-dp

Use the -dpcommand to pre-install an HBA driver specified from a .zip

or .inf file. This operation may be performed without an HBA installed in the system.

You can specify the following actions:

„p — Pre-install driver package (default)

„i — Install driver package

„u — Uninstall driver package

„g — Get driver package path

You may also specify the following flags:

„DRIVER_PACKAGE_FORCE

„DRIVER_PACKAGE_LEGACY_MODE

„DRIVER_PACKAGE_ONLY_IF_DEVICE_PRESENT

„DRIVER_PACKAGE_REPAIR

„DRIVER_PACKAGE_SILENT

You may need to reboot the system following this command. For details about the success or failure of the driver update operation, view the trace log file (see Appendix F Using Trace).

-dr

(Display Default Router List [IPv6 only])

The IPv6 default router list includes both the active default router and a short list of other routers that advertised themselves as capable of acting as a default router. The active default router always appears first in the list.

To view the default router list, enter the -drcommand as follows:

5-8 SN0054621-00 E