Frequently asked questions
Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.
Technical faults
Problem | Possible fault | Solution | ||
After turning on the | The dishwasher is not | Insert the plug. | ||
dishwasher with the | plugged in. |
|
| |
button, the Start/Stop | The circuit breaker has | Reset the circuit breaker. | ||
indicator light does not | ||||
tripped. | (See data plate for the | |||
flash. | ||||
| correct fuse rating). | |||
|
| |||
The dishwasher stops | The circuit breaker has | – | Reset the circuit | |
during a program. | tripped. |
| breaker (see data plate | |
|
|
| for the correct fuse | |
|
|
| rating). | |
|
| – | If the circuit breaker | |
|
|
| trips again, contact | |
|
|
| Miele. | |
The program sequence | There may be a technical | – | Press the button to | |
indicators Main wash, | fault. |
| turn the dishwasher off. | |
Drying and End all flash |
| After a few seconds: | ||
simultaneously. |
| – | Turn the dishwasher | |
The time display shows |
| |||
|
| on. | ||
fault FXX. |
|
| ||
| – | Use the Program | ||
|
| |||
|
|
| button to select the | |
|
|
| desired program. | |
|
| – | Press the Start/Stop | |
|
|
| button. | |
|
| If the program sequence | ||
|
| indicators flash again, | ||
|
| there is a technical fault.? | ||
|
| – | Contact Miele. | |
In addition, the drain | Fault F70: | – Close the water tap. | ||
pump may run even | The waterproof system | – | Contact Miele. | |
when the door is open. | reports a fault. |
|
| |
45
