Q-Logic SN0054621-00 E manual Edit a Specific Port Setting, Configure iSCSI Settings

4 – Interactive Mode Commands Port Level Info & Operations Menu

S

„Basic settings for instance 0

„Advanced settings for instance 0

Edit a Specific Port Setting

Use the Edit a Specific Port Setting option when you know the name and parameters of the settings you want to change. For a list of parameter names and values, refer to Appendix A Port- and HBA-level Parameters. All of these parameters are also available in the following options from the Port Firmware Settings Menu:

„“Configure iSCSI Settings (CLI Options -n and -nh)” on page 4-24

„“Configure Firmware Settings” on page 4-25

„“Configure Device Settings” on page 4-25

„“Configure Basic Settings” on page 4-26

„“Configure Advanced Settings” on page 4-26

To edit specific HBA settings:

1.At the following prompt, type the name of the parameter you want to change:

Enter the HBA parameter to modify:

2.At the following prompt, type the new value:

Enter the HBA parameter value:

The following prompt re-displays:

Enter the HBA parameter to modify:

3.To modify another parameter, repeat the preceding steps 1 and 2.

4.When you are done, press ENTER to return to the Port Firmware Settings Menu.

Configure iSCSI Settings

(CLI Options -n and -nh)

Use the Configure iSCSI Settings menu to modify the following HBA iSCSI settings:

„Force_Negotiate_Main_iSCSI_Keys

„iSCSI_Header_Digests

„iSCSI_Data_Digests

„iSCSI_Immediate_Data

„iSCSI_Initial_R2T

„iSCSI_Snack

„iSCSI_Discovery_Logout

„iSCSI_Strict_Login

„iSCSI_Alias

4-24 SN0054621-00 E