Q-Logic SN0054621-00 E manual Using Trace, To use trace, Click Properties

F Using Trace

Tracing can provide useful information to QLogic developers for identifying application, HBA, and networking issues. For advanced users of SANsurfer iSCSI HBA CLI, tracing may provide useful information about detailed steps that are occurring for various operations.

To use trace:

1.To identify the directory in which to place the configuration file, follow these steps:

a.Right-click the SANsurfer iSCSI HBA CLI Windows desktop icon.

b.Click Properties.

c.On the Shortcut page, click Find Target.

2.Go to the following directory:

C:\installed\pre-dvt-1.1.00.09

3.To activate trace, locate the iscli.cfg.txt file and rename it to iscli.cfg.

4.Run SANsurfer iSCSI HBA CLI.

5.Modify the trace variables, levels, and data as described in the following sections.

„ “Trace Variables” on page F-2„ “Trace Level” on page F-2

„ “Trace Data” on page F-4

6.Run SANsurfer iSCSI HBA CLI again.

You can control tracing by putting an iscli.cfg file in the location of the SANsurfer iSCSI HBA CLI executable module or in a working directory.

SN0054621-00 E F-1