Q-Logic SN0054621-00 E manual Import HBA Configuration, To import a single HBA configuration

4 – Interactive Mode Commands

Host Level Info & Operations Menu

Import HBA Configuration

(CLI Option -import)

To import a single HBA configuration:

S

1.From the HBA Import Menu, type the number for the Import option, and then press ENTER.

SANsurfer iSCSI HBA CLI prompts you to enter a file name containing the HBA configuration.

2.Type the path and file name of the saved HBA configuration you want to import, and then press ENTER.

SANsurfer iSCSI HBA CLI reads the file, shows the HBAs whose configurations are in the file, and prompts you to select one to import.

3.Type the number of the HBA whose configuration you want to import, and then press ENTER.

The following appears:

You will now specify the target HBA to import the configuration to.

Please select a method for identifying the destination port(s):

1)Import to ALL ports.

2)Import to a list of ports (comma delimited).

3)Import to the currently selected port.

Please select an option:

4.Select a configuration import option, and then press ENTER.

You are now ready to choose which parameter sets to import. Please respond yes (y) or no (n) to each parameter set.

5.Select from the following parameter sets to import:

HBA Level Settings Network Settings iSCSI Name Firmware Settings CHAP Table

Target Settings (required if you Boot Settings is needed) Boot Settings

4-10 SN0054621-00 E