Q-Logic SN0054621-00 E manual Gcr, Display General System Information, Help

A

5– Non-Interactive Mode Commands Non-interactive Commands

-fa <Filename>

For example if the image is for a QLA4010, all QLA4010s are updated, and no other HBAs. (Newer images may be appropriate for both QLA405x and QLA406x type HBAs.) Issuing this command resets all updated HBAs.

For information on the interactive version of this command, see “Update Firmware Image (CLI Option -f)” on page 4-13.

-g

(Display General System Information)

To view general system information, enter the -gcommand as follows:

-g

SANsurfer iSCSI HBA CLI shows the following:

„Host name

„Host version

„Host type

„User type

For information on the interactive version of this command, see “Display General System Information (CLI Option -g)” on page 4-9.

-gcr

(Retrieve FW Crash Record)

To get crash record information for the specified HBA port, enter the -gcrcommand as follows:

-gcr<hba_port_inst> <Crash Output File>

For information on the interactive version of this command, see “Retrieve FW Crash Record (CLI Option -gcr)” on page 4-15.

-h

(Help)

To view the SANsurfer iSCSI HBA CLI help file, enter the -hcommand as follows:

-h

For convenience, you can send the output to a file for easier viewing or printing as follows:

Iscli –h >file.txt

For information on the interactive version of this command, see “Help (CLI Option -h)” on page 4-49.

SN0054621-00 E 5-13