Q-Logic SN0054621-00 E manual

S

SANsurfer iSCSI HBA CLI User’s Guide Command Line Interface for QLogic iSCSI Host Bus Adapters

Updated (added and removed parameters) the list of device settings.

Updated (added and removed parameters) the list of basic settings.

Updated (added and removed parameters) the list of advanced settings.

Changed Bootcode Settings Menu to new BIOS/UEFI (or FCode) Settings Menu.

Removed Unbind Target option from Target Level Info & Operations menu.

Added more detail for Display Target Information option.

Added new Target Discovery Menu and its options.

Removed subheadings referencing non-existent interactive mode commands.

Added new miscellaneous command line options.

Added new discovered target command line options.

Added new link configuration command line options.

Added other new target command line options.

Added unbind persistent target command line options.

Added new send target and statistics command line options.

Added new port and HBA configuration parame- ters (each in a separate table).

Added missing descriptions for parameters. Deleted obsolete parameters.

“Configure Device Settings” on page 4-25

“Configure Basic Settings” on page 4-26

“Configure Advanced Settings” on page 4-26

“BIOS/UEFI [or FCode] Settings Menu” on page 4-34

“Target Level Info & Operations” on page 4-36

“Display Target Information (CLI Option -t)” on page 4-37

“Target Discovery Menu” on page 4-44

5 Non-Interactive Mode Commands

“-acb” on page 5-3,“-dce” on page 5-7,“-dp” on page 5-8,

“-dtdsp (Display Discovered Targets)” on page 5-9through “-dtrema (Remove Discovered Target)” on page 5-11

“-lc (Configure Link Configuration)” on page 5-18and “-lcd (Display Configured Link Configuration)” on page 5-18

“-pad” on page 5-24,“-pdt” on page 5-24and “-pet” on page 5-24

“-pu” on page 5-25and “-px” on page 5-26

“-stadd” on page 5-29through “-strema” on page 5-30

Appendix A Port- and HBA-level Parameters

SN0054621-00 E Page iii