Q-Logic SN0054621-00 E manual HBA-level Parameters, Table A-2. HBA Settings

A– Port- and HBA-level Parameters HBA-level Parameters

S

HBA-level Parameters

Table A-2lists the HBA parameters and their values. To view all HBA parameters, both configurable and non-configurable (read-only), use the -choption in non-interactive mode. To edit configurable parameters, use the -nhoption in non-interactive mode.

NOTE:

The parameters in this table are sorted alphabetically for ease of use.

Table A-2. HBA Settings

Parameter	Value	Alias	Description
HBA_Alias	Character string	HBAALIAS	HBA alias name. Symbolic name
			you assign to the HBA for identifi-
			cation purposes.
HBA_Default_Fragment_	40 to 600 (units are	HBADFRT	For QLE406x HBAs only. Default
Reass_Timeout	1/10 secs)		value for the IP Fragment Reas-
			sembly Timeout.
HBA_Delayed_ACK	on or off	HBADELACK	For QLE406x HBAs only. Deter-
			mines what occurs when the HBA
			receives a Data-In PDU with the
			final bit set and no status reported.
			When on, the HBA immediately
			sends a TCP acknowledgment
			(this is the default value). When
			this parameter is off, the HBA
			delays the acknowledgment and
			waits for more data.
HBA_Reserved_TCP_	(Request assistance	HBARTCPC	For QLE406x HBAs only. A
Config	from QLogic Support)		parameter with control bits for vari-
			ous TCP algorithms in the firm-
			ware. Do not modify without
			instruction of valid configuration
			values provided by QLogic.
HBA_TCP_MAX_	4096 to 65535	HBATCPMWS	The maximum TCP Receive Win-
Window_Size			dow size in bytes.

A-10 SN0054621-00 E